Meeting Table Model SF-CFR
111,200 bahtlist price
Product Details
Conference table 6-8 seats with shade 240*120*75 cm.
Production details
Top plate in the middle : Use 20 mm thick plywood, reinforce the frame at intervals, approximately 7-10 cm apart. Cover the top with 12 mm thick MDF.Board covered with veneer
0.5 mm thick, the lower part is covered with 9 mm thick MDF.Board, total thickness 100 mm, through the process of spraying and coating with Polyester (PE) paint
Polish with varnish using a fleece cloth until the front surface is shiny like a mirror
Top plate at the end : Use 20 mm thick plywood, reinforce the frame at intervals, approximately 7-10 cm apart. Cover the top with 12 mm thick MDF.Board covered with veneer
0.5 mm thick, the lower part is covered with 9 mm thick MDF.Board, total thickness 100 mm, through the process of spraying and coating with Polyester (PE) paint
Semi-matte, semi-glossy white Attached to the side panels with 190*850*3mm steel plates.
Left and right side panels : Use 20mm thick plywood, reinforce the frame at intervals, approximately 7-10cm apart. Cover the top with 12mm thick MDF.Board covered with veneer.
0.5mm thick, the bottom is covered with 9mm thick MDF.Board, total thickness 100mm.. Through the process of spraying and coating with Polyester (PE) paint.
Polished with a varnish using a fleece until the surface is glossy like a mirror.
modesty panel : 19mm thick MDF.Board, size 450*1500mm, sprayed with semi-matte, semi-glossy Polyester (PE) white paint, assembled as a set with left and right panels.
In the center, there is a hole for wiring from the floor up to the tabletop. There is a hole covered with a round aluminum box. There is a cover to open the plastic brush.
KD.Fitting equipment: HAFELE horseshoe size 15 and 25 mm or equivalent.
Note: The specified furniture size may differ from the standard +- not more than 2 cm.
